Nyleus
Kabo
HELLSING!!!
Posts: 118
|
Post by Nyleus on Apr 5, 2009 22:48:10 GMT 8
Ic...pero yung heat produce by the mosfet di na gaano mka labas due to closed incloseure but its good na rin. Depende na rin kasi sa gun that your using, if it has more space pa to fit it in. Reason k lng din na e pcb cya kasi just want it to be clean. Nindot man gud pag nka pcb pero mas ok gyd kung naka SMD ang ako gamit kaya lng dili cya available in our local market. Ask ko sir 9th. kabalo ka mu translate to schematic tung mosfet na gi butangan niya ug active break? Site: www.airsoftforum.com/board/Aeg-Electrical-Guide-t104376.htmlOr this one: www.airsoftforum.com/board/Aeg-Electrical-Guide-t104376.html&pid=17645774&mode=threaded#entry17645774Oo nga pala, buti na alala ko, does this mosfet work on 11.1v 2300mah 12c lipo batt? oo basin pag testing nako ani mu aso lng ug kalit after pila ka kablit....
|
|
Nyleus
Kabo
HELLSING!!!
Posts: 118
|
Post by Nyleus on Apr 6, 2009 5:31:34 GMT 8
Just need someone to confirm this for me in this pic...fuse ba yung binilogan ko ng pula? & if it is, what type yan na fuse & yung casing nya?
|
|
|
Post by Delta_Shrek on Apr 7, 2009 9:33:00 GMT 8
sir Nyleus, mga connectors yan for easy removal. thats a nice idea will try that on mine..... come to think na mahirap na baklasin ung m4 ko since may mosfet na...... ;D
@9th: Thank you very many ;D sa uulitin ;D
|
|
Nyleus
Kabo
HELLSING!!!
Posts: 118
|
Post by Nyleus on Apr 7, 2009 21:59:01 GMT 8
ahh ic...I was having hard time looking for fuse kasi yung pwede magkasya sa m4 ko, IRS na kasi yun ehh so yung space is maliit but that part is solve na... i have found a way. Kung available lng sana local yung polyfuse wala na sanag ako problem....
|
|
|
Post by 9th on Apr 8, 2009 15:31:21 GMT 8
pilitin natin ang midland or times na magkastock sila by asking them daily....hehehe including p-channel mosfet para may active braking system na tayo
*p-channel: irf4905
|
|
Nyleus
Kabo
HELLSING!!!
Posts: 118
|
Post by Nyleus on Apr 11, 2009 0:28:58 GMT 8
u can also try electronics 2000 dyn sa may uyanguren, pero havent tried pa to ask pagmay vacant time cguro or this monday na....
|
|
|
Post by 9th on Apr 11, 2009 0:52:25 GMT 8
saan banda yan sir?
|
|
Nyleus
Kabo
HELLSING!!!
Posts: 118
|
Post by Nyleus on Apr 11, 2009 1:07:35 GMT 8
Kanto na cya before DCLA. You can also ask if may replacement parts dun s hinahanap mo coz dun ko na kuha ang ako mosfet kya lng replacement cya but did bought IRF/L 1404. thanks to sir 9th sa kakakulit sa midland yun nag stock na cla. ;D isang mosfet nlng ang kulang yung p-channel para may active break na din tayo.
|
|
|
Post by 9th on Apr 11, 2009 2:30:07 GMT 8
Mas maganda ang load performance ng IRF kaysa IRL, Nag torture test ko ganina using F and L, mas madaling mag init ang IRL
Actually matagal na may stock ang Midland, so happened they let me check there stock then takbo sa office, check the datasheet online, bingo may isa na mosfet pwede.
I may check again next week for p-channel, posibling mayroon sila. Check ko din sa manila supplier ko kung mayroon din sila, last week nagpadala sila pero mababa ang value.
|
|
Nyleus
Kabo
HELLSING!!!
Posts: 118
|
Post by Nyleus on Apr 11, 2009 3:57:28 GMT 8
ok cge po sir. kindly update lng din po kami sa parts if available na cla po.tnx
|
|
|
Post by 9th on Apr 13, 2009 6:08:46 GMT 8
to all who wants a mosfet, pm me para kayo na magbili ng parts din bigay nyo sa akin para ma-assemble.
|
|
|
Post by Delta_Shrek on Apr 13, 2009 14:19:53 GMT 8
@ 9th, so far okay ang nakuha ko sa iyo again many thanks.... ;D cant wait for your abs one to come out....
|
|
Nyleus
Kabo
HELLSING!!!
Posts: 118
|
Post by Nyleus on May 8, 2009 23:16:02 GMT 8
Ok.... update lng ako. finish the MOSFET & place it on PCB + dual fuse protection using car fuse na 20 amps. It works well kaya lng naging messy ang pcb ko na puno na ng jumper.. the pcb copper just blew o na puputol sa bawat kalabit ko ng gatilyo ng beng-beng ko. Sa tingin nyo may problem ang pagkagawa ko sa pcb ko during its etching stage? o dapat makapal ang pag etching mo sa pcb copper? medyo manipis o maliit yung pagkaka etch ko ng pcb ko ehh. yun kaya ang problem? Eto attaching a pdf file since i dont have any pics to show. wala kasi akong digicam atm hiniram & my cell is too old to have a cam, low tech ika nga...hehehehe...Dl nyo nalng if u want to see the design. rapidshare.com/files/230628379/MOSFET_AEG_Placement_Guide.pdf.html
|
|
|
Post by 9th on May 8, 2009 23:33:06 GMT 8
sa may daanan ng hi-current lagyan mo ng medyo makapal na soldering lead sir
|
|
Nyleus
Kabo
HELLSING!!!
Posts: 118
|
Post by Nyleus on May 8, 2009 23:59:53 GMT 8
kapalan ko lng cguro yung copper nya during etching stage. para mas malapad yung pwede nyang daanan ng current.
|
|