|
Post by Han_Solo on Jun 13, 2008 21:34:33 GMT 8
Yup sir 9th. Same pa man din, para lang normal na nub when installed & you do your hopmech/ barrel/nub slot alignment. Side by side mo cya with stock nubs mas maliit cya. I think Sir Shredder was taking into account the thickness of the rubber as well. What I observed, anliit na nga, pero sensitive na masyado ang hop adjustments mo. Challenge hanapin ang sweet spot (I want it dead flat with no bb rise at the end of flight.) As in fine turns lang, very fine, pwamis. Another thing in my Aug, the scope & hop is zeroed around 40ft, after na zero ko na ang scope & hop, I pull out the Aug barrel assembly & peep thru the barrel, konti lang talaga ang naka labas at nag to-touch sa bb pag silipin mo cya thru the barrel. The amount of hop protruding was so minimal, but the bb trajectory was already dead flat. I was only using say 25% the amount of hop for the bb to fly flat, as compared to a stock nub. Lesser amount of force needed because increased ang surface contact.. or somethin like that. Softer rubbers like Systema or a Guarder 50% probably work best, haven't tried it yet, FAS people have, they claim positive results. Softer means more moldable to the concave shape of the spacer, may explain why softer rubbers work better. So far the CA hop rubber seems to be doing Ok.
|
|
|
Post by 9th on Jun 14, 2008 3:26:39 GMT 8
balik ko lang, ganito ang itsura sir?
|
|
|
Post by Han_Solo on Jun 14, 2008 10:43:04 GMT 8
Hindi gaano sir, parang normal lang na nub at first glance, but if you inspect closely, may konti-konting curve ang middle, not as pronounced like sa gi draw mo sir.
I believe it needs the pressure to shape the rubber to the concave.
|
|
|
Post by Shredder on Jun 14, 2008 12:17:20 GMT 8
Greetings and a pleasant day to everyone! I am very happy and honored that the SCS (Shredder's Concave Spacer) has reached Davao thru Sir Han_Solo and he is my exclusive distributor there. Since most of you are not familiar with the SCS, here's a little information... The SCS is made from high quality engineering plastic which is chemical and wear resistant. It is specially designed to the contour of the bb's and the inside diameter of the barrel as well. The SCS is hop up rubber bucking friendlier compared to Element's H-Hop and Big-Out's product due to its concave shape allowing more surface contact on the bb and it serves as a "guide rail" as well. The SCS doesn't get squished like the stock rubber spacer/nub/cushions thus it provides a very stable platform for bb's to pass through. There are a lot of skeptics who have turned into believers! I personally believe that the SCS beats all the other similar products. If in doubt, you can try it before you buy it provided that Sir Han_Solo is present. Here are some links for the reviews and testimonials of those who have tried the SCS... www.filairsoft.com/forum/showthread.php?t=30459www.filairsoft.com/forum/showthread.php?t=33064Seldom does a product come out that's made in the Philippines and at a very affordable price. I leave it all to you and I hope you will also be "believers" in the near future. Maraming salamat sa inyong lahat and God bless...
|
|
|
Post by 9th on Jun 14, 2008 13:20:50 GMT 8
welcome to 1AD sir Shredder...
@han_Solo thanks.
|
|
|
Post by Shredder on Jun 14, 2008 18:05:49 GMT 8
@sir 9th - Thanks for the warm welcome! I just would like to add something: On the left is my stock rubber spacer and on the right is the SCS. Notice the irregular shape of the stock spacer that usually comes with all AEG's. There's a hole in the middle which is uncentered and unprecise... Notice the uneven shape of the stock hop spacer on the left... I hope and wish that you'll all have an SCS installed on your AEG's. Till then, have a nice weekend and God bless... -Ricky
|
|
|
Post by 9th on Jun 14, 2008 18:41:46 GMT 8
1024px is fine, the forum can auto resize any pics larger than 600px sir Ricky.
Anyway i may going to try this to my AKs and M14s. I'm going to post the result.
Thanks!
-jojo
|
|
|
Post by miklo on Jun 14, 2008 21:01:21 GMT 8
actually sir same pa rin ang lapat ng hop rubber.....sa gitna pa rin....pero once the bb will pass/fired....liliit ang stress sa middle point ng hop rubber kasi "hollow" na siya dun....kasi ang tumutulak sa hop....di na sa gitna...ung sa tabi na....kumbaga ung mga paa ng "H" ang tumutulak sa hop rubber....gets nyo? paki-illustrate nalang sir jo...hehehe
|
|
|
Post by PASAS on Jun 14, 2008 22:56:27 GMT 8
patay ang heli hahaha!
patry ng aug mo bukas.. ayos to! ;D
|
|
|
Post by 9th on Jun 14, 2008 23:49:02 GMT 8
miks pwede na 'yong na post ko na image
|
|
|
Post by Shredder on Jun 16, 2008 14:19:23 GMT 8
Good day everyone! The SCS will be available tomorrow through Sir Han_Solo. Medyo na delay ang delivery ng 2GO kasi... Please PM him if you want to order k. Thanks very much and have a very nice day!
|
|
|
Post by 9th on Jun 16, 2008 14:38:35 GMT 8
sir han_solo...don't forget me... one for me and one for sir stan... ako na magbayad...
|
|
|
Post by Shredder on Jun 16, 2008 15:03:56 GMT 8
Mga sirs, I made the SCS for all us to save on the amount of bb's that are being wasted each time we play. Hwag nyo lang sayangin ang bb's nyo through plinking like the others do k! Hahahaha... Add ko rin... Please don't shoot at the birds too k... ;D
The SCS has arrived already! Please get it from Sir Han_Solo k. Thanks very much! ;D ;D ;D
|
|
|
Post by Han_Solo on Jun 17, 2008 12:00:37 GMT 8
SCS is here. Very limited po ang supply, it's selling like hotcakes thru-out the Philippines. PM's replied. Thanks.
|
|
|
Post by coolanghel (Ka Jorge) on Jun 17, 2008 14:12:27 GMT 8
Sir Han_Solo,
Pa PM po ng price... thanks in advance
|
|