|
Post by El Gato Negro on May 30, 2006 15:00:03 GMT 8
Ask lang, kaya bang pa abutin ng 500 up fps ang TM Mp5? tnx
|
|
chris
Moderator-1
MP5 Club Mod
Posts: 789
|
Post by chris on May 30, 2006 19:32:08 GMT 8
you'll have to change to long barrel mp5..
|
|
|
Post by miklo on May 31, 2006 16:54:26 GMT 8
ano kaya pinaka-max fps maabot ng mp5 w/out changing the looks....i mean gbx lang ang galawin...anu-ano kaya dapat palitan? anyone.....
|
|
|
Post by the_bangus on Jun 1, 2006 2:30:16 GMT 8
hmm... pwede pa try? uhmm.. everything po.. hehehehe
|
|
|
Post by El Gato Negro on Jun 1, 2006 17:15:25 GMT 8
naka 370mm 6.03 ang barrel ko. kulang pa ba ang haba? is it advisable sa type 0 na cylnder? nag try ako pero parang humina.. any advice para umabot ng 500
|
|
|
Post by the_bangus on Jun 2, 2006 15:06:03 GMT 8
sa pagka alam ko po ang type0 cylinders is only good for AK length barrels and up.. try niyo po yung teardrop cylinders.. and share the results 500?? hmm... SP140 + STU helicals + Bore-up Kit.. i think would do the job.. syempre dapat completo recado ka na nyan
|
|
|
Post by El Gato Negro on Jun 2, 2006 16:03:31 GMT 8
yup, pang long barrel ang type 0 na cylnder, pero minsan swerte swerte lang sa matching ng barrel, cylnder at piston head
Bore-up Kit ang kulang ko.. short pa ako sa budget.. any mp5 lovers na naka bore ups dyan.... hehehehe alam nyo na test lang natin... just wana try kung aabot ng 500..
|
|
|
Post by batusaix on Jul 6, 2006 16:56:40 GMT 8
Sirs good pm.
I have a Well R5 wid m120, metal bushing,spring guide bearing, G&G airseal nozzle. Na port ko na rin ang head at napalitan ang o-ring & installed new hop rubber. Semi firing is good & bb's seem to track pretty well, pero pag auto nagmi-misfeed, niluluwa ang bb's. Gi-try nako wid a friends cyma mag that works fine wid his gun, ganun pa rin sa akin, which means its the gun not the mag.
Any opinions on this one Sir's?
|
|
chris
Moderator-1
MP5 Club Mod
Posts: 789
|
Post by chris on Jul 9, 2006 0:32:09 GMT 8
check your entire hop up.. anjan lang yan.. baka ang rubber lang or hindi maganda ang placement.
|
|
|
Post by batusaix on Jul 10, 2006 10:53:56 GMT 8
Sir chris, duda ko its got to do with the airseal nozzle, pag single fire naka retract full ang nozzle, pag naka auto, labas konti yung nozzle nung sinilip ko sa hop up chamber. I was thinking of sanding the airseal, pero id rather go with a sector chip. Inaantay ko pa reply ni sir Jo regarding sa kanyang diy sector chip, kahit actual size lang para gayahan, ako na gawa.
Suggestions please anyone. tnx.
|
|
chris
Moderator-1
MP5 Club Mod
Posts: 789
|
Post by chris on Jul 10, 2006 20:17:19 GMT 8
sir i try mo compare sa airseal ng r5.. sand mo lang mga ilang mm para magkapareho na sila..
btw, m4 nozzle ang ginagamit sa r5.
|
|
|
Post by batusaix on Jul 11, 2006 11:19:42 GMT 8
M4?! aww man! Thanks for the heads up sir Chris. I'l try this as soon as i open my r5 before the weekends game, let u know of the results. Thanks again.
|
|
|
Post by liechar on Aug 21, 2006 9:06:36 GMT 8
mga sir,yung r5 mp5 ko pwede pa ba aabot ng 400fps ,,nka tight nozzle,king arms m130 spring,w/bearing piston head at spring guide, sanyo ncad 2400mah batt still 371 pa rin ang chrono,,patulong naman mga sir..i think konti na lang kulang..
|
|
|
Post by ZeeZeeTop on Aug 21, 2006 9:25:31 GMT 8
@ liechar - konti na lang talaga yan sir! try mo longer barrel.
|
|
|
Post by miklo on Aug 22, 2006 18:52:25 GMT 8
na try nyo na ba sir tangalin ang airleaks? check oring sa pistonhead, cylinder head, airtight nozzle, hop chamber... it would increase your fps kung wala na talagang leaks.
|
|