|
Post by SANDMAN on Mar 19, 2006 11:09:50 GMT 8
Very interesting development sir. Thank you for sharing all that valuable information. I hop you'll continue with your project and try to install that well barrel in your MP5 hop up... good luck...
|
|
|
Post by the_bangus on Mar 19, 2006 20:44:36 GMT 8
yup.. hindi compatible.. chaka different ang hop-up.. sabi sa isang forum kailangan ko pa daw ipa machine shop ang barrel para lang ma fit. kasi hindi drop-in ang mga TM, CA at Well na barrel.. this would serve as good reference para sa mga may planong bumili ng CYMA 0.27J.. sakit sa ulo!! ;D i bought an R6 barrel tsaka WELL R5 hop-up.. i found out humina fps ko even placing MS110SP. mas low pa kaysa stock fps (which was chrono'd @ 278~285fps). doing a simple hop-up leak test with a 1cmx1cm bond paper, ang layo ng lipad ng paper! i placed back the stock CYMA barrel and hop-up... di na lilipad ang paper... my guess is that hindi compatible ang stock air nozzle ng CYMA sa WELL na hop-up... tsaka, ito din thinking ko why (before i did everything), the WELL hop-up package included an air nozzle in the first place. i also tried placing the WELL R5 air nozzle, hindi kakasya... masmalaki ang outer diameter nya, end result is that ang front part ng tappet plate, didikit na sa "floor" ng mechbox so hindi na maka galaw.... i think kakasya yung TM MP5K nozzle pero i haven't tried and tsaka not willing to loose 500+ for something that might not work... siguro someone here can test this... plano ko e-machine ko na lang yung R6 na barrel para parang stock CYMA barrel. mern din kaming tools dito sa garage anyway.... pero last resort na to wow! thanx for the info.. how exactly does the leak test work? i have to try that on my hop-up.. kasi sabi ng aking gunsmith na hungaw daw ang hop-up assembly ko.. gusto ko itest.
|
|