General chat for H&K G36 variants

[vernes]

tnx sa answer..heheh ca po yung g36c ko ..na testfire ko na po yung unit ko..pinalitan ko lng xa nung old deepfire ko na piston body and metal spring guide..nd 130 na spring..ala na xa doublefeed or misfeed..so far ok na din yung magz ko..no problem kc nilagyan nmin ng tape yung sa loob pra d bumuka pag nka full kamot xa.hehe tingin nmin yun dhilan ng misfeed kc bumubuka kpag nka full yung pag kamot..hehe

tnx

[Ang Supremo (ka Boni)]

G36 enthusiasts, Im using a CA 36. wat can you suggest batt. that can fit inside. I had a bremenhaus 2150 lipoly last time fit siya pero guot. na daot, back to Nicad 9.6. suggestion.

Wat can you say to the present setup. stock na lang is Cylinder Head. ug barrel.
replaced:
1. System Magnum motor
2. CA Flat high speed gears.
3. Type 0 systema cyinder
4. Deepfire new titanium pbody
5. systema cylinder hear
6. PDI 190, spring guide with bearing (guarder)
7. new tappet plate.

What do you think is the fps?

[ROSCOE]

paunsa na daot sir?

[Ang Supremo (ka Boni)]

bigla lang, dili na mutarong ug charge test it to several lipoly charge with balancer. gi-pa check nako sa battery kingdom daot isa ka cell.

[SANDMAN]

Aug 2, 2008 23:57:40 GMT 8 Ang Supremo (ka Boni) said:

Wat can you say to the present setup. stock na lang is Cylinder Head. ug barrel.
replaced:
1. System Magnum motor
2. CA Flat high speed gears.
3. Type 0 systema cyinder
4. Deepfire new titanium pbody
5. systema cylinder head
6. PDI 190, spring guide with bearing (guarder)
7. new tappet plate.

What do you think is the fps?

a. I'm assuming that you have insane ROF with that setup. I suggest you do the ANGLE OF ENGANGEMENT mod with your piston so that it will not be severly stressed and will last longger.

b. I suggest you install an AUG Airseal nozzle. Its a basic flaw with all G36 models(excpet JG) that the default airseal nozzle is too short for the hop chamber. The longer AUG nozzle cures this.

Regarding your busted BH Lipoly, I suggest you swing over to the Ronin HQ and let them try to charge it there. Naa silay "gamhanan" na charger that works wonders with seemingly "dead" Lipoly batts. Yep, I had a dead BH too and their charger brought it back to life.

Try lang. Gasolina lang naman masasayang mo kung di mag work.

[Ang Supremo (ka Boni)]

Sir Stan, it is what I see and get comment from comrades but I have never had it chrono for ROF. Sorry about being dumb about definition of terms "ANGLE OF ENGAGEMENT", ano to? pa explain briefly.

Ok. the fps is between 400-420. With your comment on item#b. maybe this is the cause of the small fps. I just need it to put it back to at least not below 440.

correction: 5. systema piston head diay.

[rychu]

guys ano bah ang naka advantge sa g36 compare sa mga m4? coz im planng to buy g36, how much bah g36?

[Ang Supremo (ka Boni)]

Sir rychu, my 1st high-end gun was a CA G36. It is a long barrel of the G36 Family. In CA there are 3 models which are G36, G36K & G36C. In other brands, they have one or the 3 variants.

I don't see any advantage or disadvantage between G36 with M4 and all other AEG brands. If you say sa unit, pareho lng o depende yun sa mag repair o maintain nang future unit mo. I think it is more on the looks and how comfortable you will be with the gun. One thing, most are using M4 so during games you can borrow mags with your teammate. If G36, you may have to bring or buy 2 or more mags for your use only.

What decided me to buy a G36? I just like it. I just want to be different.

[vernes]

dugay na last post nako dre ah..hehe

sir rychu pwede ka naman ggmit ng m4 mags sa g36..palitan mo lng ang magwell pra ma convert to m4.. cguro nsa 1000+(china) meron na dn ca brand..so far ok naman..la na prob masydo sa battery kasi dami na lipoly batteries ngyn na fit sa hand guard ng g36..d gaya noon ang available batts is yung sub c..

sa price nasa 12k up pa cguro ang ca na brand..