P90 Pictures

[Nitro]

That's right Sarge. 190 for the midcap, 300 for the hi-cap. Im sure it will stand on the butt stock (but if you had optics on it, id rather not )

The M4/M16 brings the total online bb available 1,400 as claimed. I use a wmag so I have a 1,700 capacity.

D7k mentions a Wmag which increases capacity (up to 1,700 rnds) and i dont have an idea about it, but would really be interested to know.

[BRO SARGE]

Sir Nitro,

I just got my box mag today. To be honest, I wasn't that impressed of the mechnism. But indeed, it's quite a unique thing to have. The only down side is that it's not "wind-free". So it's just same as back to "kamot". Am now pondering of selling it out. mmmm let's see.

Bro Sarge

[SANDMAN]

For something that expensive, they should have made it an electric winder. Sayang ang pagka-box mag niya, but you have to "kamot" for all those BBs to be fired- and that's a LOT of KAMOT for a LOT OF BBS!

[BRO SARGE]

Sirs,

Here are pictures of my latest P90s. I have one RD and one TR, both having black lower receivers.

My RD...

This is what I use most of the time...the set up.

- Systema Metal Bushings
- Angel Piston Head
- CA Stock Piston Body (I was using Angel Ver. 06 Hi-Speed before)
- M100 Spring
- Systema Area 1000 Cylinder
- Systema Ver. 2 Spring guide with bearing
- Mosfet Switch (through the courtesy of Sir Alakdan)
- I use 9.6Vdc/2400mAh Sanyo NiCd Sub C batts
- Deans connector
- 333 FPS as per last Chrono (Very Hi ROF)
- M4 flashider for ICS 4in (short QD suppresor)
- Last but not the least...257mm TANIO KOBA Barrel


Please also see some additional notes below every picture


The black wire you see would just be a connection if I opt to use sub c batteries and place it where the std/hi cap mags were before.
As shown, I usually use the box mag from First Factory with a 190 rounder TM M4 mag.




This would be the customized battery I use as another option. I had it done at Battery Specialists, Famer's Cubao c/o Oliver.




Picture of the batts inserted to the lower receiver




Picture of gun with Rear Sub C batts inside the gun and covered with a Hurricane Butt Cover.




My RD with a HERO ARMS M4 W-Mag (850 Rounds). This would be the one with an auto sensor (Microphone) so you'd be "Kamot-Free"




I had to rewire the microphone sensor such that it is positioned at the lower portion of the gun, directly under the gearbox. HERO ARMS has specified too that their WMAG would work effectively with "upgraded" guns. The more noise your gun's gearbox makes, the better sensing it would have. With my gearbox using an M100 spring, sometimes the sensing does not respond that well. Using an SP120 will be better. The HERO ARMS WMAG also comes with a sliding switch that would enable you to wind up the mag continuously. I also modified the wiring to let me use a push button remote switch (stuck on the upper plastic mag). Also, the WMAG comes in gray color, I've colored the plastic part (upper mag) using Dull Black Epoxy Paint by RRJ. The metal part (lower mag) I had powder-painted.




MY RD with all the optics I have...ICS Red Dot, ICS Flashlight Holder, China Flashlight with Remote switch. I barely use them, just for "japorming" purposes....ang bigat kasi...hehe




My favorite picture in action. Taken by a pro photographer at UP DMZ last Sept 16, 2006. He is a friend of the SOE folks.



Another picture taken on the same day by the same professional photographer.




OK...eto mask down...this is me. No laughing please!




MY TR...the Sniper Set Up (c/o the good wisdom of Sir Stanley Suarez, aka Sandman, salamat po sa mga turo nyo)

- Systema Metal Bushings
- Systema Piston Head
- Systema Cylinder Head
- Deepfire Piston Body (Full Teeth)
- CA STU Gears Flat
- SP140 Spring
- Systema Area 1000 Cylinder
- Systema Ver. 2 Spring guide with bearing
- Mosfet Switch (through the courtesy of Sir Alakdan)
- I use 9.6Vdc/2400mAh Sanyo NiCd Sub C batts
- Deans connector
- 519 FPS as per last Chrono
- BN Tight Barrel 6.04mm (363mm length for M4)
- G&P Socom Suppressor (much harder than the TM Stock Socom Suppressor)
- 6 x 32 AOE Tasco Scope




Picture with the Box Mag using a 190- Rounder M4 TM Mag and a Tasco Scope


I usually use this set up (with 300 round Hi-Cap TM P90 Mag) if I use this sniper set up


Well guys, if you have any questions, send me a PM. I just want to say that the Tanio Koba barrel is a very good solution in making your gun efficient (meaning shooting your gun at the farthest and straightest distance with the least power required).
Pasensiya na po kung masyadong mahaba. I just wanted to share what I can.

I would also like to have extra gearboxes for me to change FPS quickly. With the easy take down and assembly process of the P90, this makes me very flexible in whatever type of game I play or what gamesite I play in.

Thanks and happy and safe shooting to all. Mabuhay ang mga P90 users/lovers.

BroSarge

[9th]

thanks sa images brosarge! this pics are nice too if i have p90 :-) ...may ganyan paba ngayon sa mga suking tindahan natin?

[hellboy]

gr8 looking gun sir!

up for this...

[9th]

so this is from TM website as of today...
TMp90

gumagawa parin sila ng p90...

[BRO SARGE]

Sir Alakdan,

Yes sir...they revived the P90 RD...the TR as been in the market for some time. TM daw had to look for another supplier of the RD. I actually have one of the New Sistema Tattica...stock...am selling it. PM me sir if you're interested. I just got it from Japan last week.

BroSarge

[pvtpyle]

Sir BRO SARGE,

Nice suppressor you got there sir! Saan mo ba sya nabili sir? IMHO parang mas maganda yung dating ng P90 with its mid-lenght suppressor. Da best din boxmag at Hero Arms mag combination mo sir, mukhang fit talaga sa CQB.

pyle

[batusaix]

Galing mga sirs.

Napa isip tuloy... : )

[BRO SARGE]

Sir pvtpyle,

Thanks...sir...yung suppressor ko is only an ICS QD Suppressor. They come in in 2 lengths...one 4in and one is a 7in. I had both of them before kaso yung 7in would be a bit heavy for a P90 frontside to carry...the the portion where you put on the flashider is just overmoulded in plastic...I see some P90s na loose yung metal overmould...so i decided to shift back to a SOCOM silencer...but the ICS QD suppressors are the best so far...maganda ang kapit...but you have to replace your flashider with an M4 type since most of QDs are designed for M4s.

The box mag and hero arms combi takes some time to in getting used to...basta sir it also pays to have an extra m4 mag...just in case the hero arms mag jams...I would suggest a TM 190 Rounder Hi-Cap mag.

Thanks sirs.
BroSarge

[BRO SARGE]

Sir batusaix,

One of the purpose of this P90 forum is to tell airsofters that the P90 is a good gun. I've lent my guns to several people who had their guns breakdown during a gaming day. So far sir, all who have tried using my P90 gun had a different view of the gun after they've used it. I hope the P90 gains more popularity and that more airsofters consider having it in their arsenals.

Thanks,
BroSarge

[batusaix]

Bro Sarge,

Well said Sir!

: )

[baJboL]

Sir Bro Sarge, so this is the one you were working on. Ganda nang setup mo sir! nakaka ingit talaga lalo na ang sniper TR mo.
Yung setup mo sa TR makaya pala nang stock gearbox ang SP140 kahit hindi reinforced?

[BRO SARGE]

Sir baJboL,

Genki kai?....Opo sir...I know of a guy who's been using an SP150 and higher na set up...kaya po ng stock gearbox. I've never come across a version 6 gearbox shell na reinforced. It may be an interesting thing to have.

Maganda rin po siguro to have a Tanio Koba barrel...kahit ak length na 460mm or Aug length ng 510mm....and lower the spring to a corresponding level...kasi pati cylinder siguro palit din...in this way...we need not resort to a higher spring...so less stress on the gearbox.

Sore jaa....genki di ne!

BroSarge