RONIN Biatch AUG!

[SANDMAN]

The RONIN are the new proud owners of an orphaned TM Steyr AUG. Project gun po natin 'to mga bros... please remit your 500p amot per head to either
a. Buhangin HQ or
b. Guns and Roses HQ
ASAP!

For the immediate plans for our new baby- mild upgrade muna tayo para hindi ma-bun-og ang mga pitaka natin... kahit 400fps lang muna kasi AUG naman 'to eh.. malayo ang range kahit na 400fps lang.

Our baby comes with:
CA SPring guide with bearing
Stock TM gears
Stock Tm Piston and Piston head
Stock Tm barrel
Stock Etc etc.

Amot amot na lang tayo sa mga kelangan na parts- kung sakali meron kayo nung kelangan na parts- at willing kayong i-donate sa new baby natin- post nyo lang dito...

Projected parts required:
1. SP120 or PDI170 - Stan
2. EG700 short or CA Rewind- Stan
3. CA stock gears or preferably CA STU and anti-reverse latch -Pwde ako pahiram ng XYT gears and latch for now.
5. Piston head with bearing

For LEVEL-II/III upgrades- kani pa kelangan nato:
6. Prom or Guarder hop bucking <-kahit yung mga used na natin
7. ICS Turbo 3k <-optional- okay naman ang EG700 eh.
8. Mosfet/Relay<- kung may tiyaga ako- kabit ko kaagad ang relay mamaya/bukas
9. 550mm Tight bore barrel- EDGI lang para barato... 1.8k
10. STU FLAT gears <- kahit retaso retaso lang- para mabuo.
11. SP150 <- may extra ako nito
12. Bore up kit <-optional na 'to kay mahal kaayo.

Cosmetic upgrades???
New Paint job- sa buhangin HQ na natin gawin- dun naman ang mga expert painters eh.
Scope- yung mga luma nyo diyan- donate nyo na
Sling- Donate po kayo
Phantom Kit short- hmmm... meron benta sa forum diba- ma awitan nga... or pwede tayo pagawa kay ALVIn... parinig... hey.. pssst... bossing...
Shorty Setup- pwde ko pagaya yung shorty adaptor ko na Laylax- ipa torno lang natin.

Feedback? Kung sino man di maka-sama sa Samal- tabangi ko ha...

[SANDMAN]

Status report:

1. Replaced TM gears with XYT gears.
2. Checked compression and re-lube cylinder/p-head.
3. Repaired trigger contacts
4. Sp130 ang naka-kabit. Try siguro natin 'to with a settled SP140- sino may extra diyan?
5. Okay pala ang motor- di na kelangan palitan.

Next on the list-
1. Install Relay
2. Clean barrel
3. Relube hop up bucking/ replace if necessary
4. repair/tighten loose fitting of body parts(bangil system)
5. Test install Phantom Kit(short) <-- bilihin ba natin 'to guys? Extra Amot na naman ito... pag usapan natin bukas ha...

[SANDMAN]

Status report:

1. Relay Installed
2. Relubed hop-up bucking
3. Replaced motor- mahina pala talaga yung motor na orig- used the CA Rewind
4. Tested the phantom kit- okay siya... kasya kahit na 550mm inner barrel sa loob. Just a few inches shorter than my "long" phantom kit. Tinanggal ko muna kasi CQB games tayo bukas eh. Hehehe...

Chrono- 450fps
ROF- From HELL!!! Mas mabilis pa sa STOCK SPRING on STOCK GEARS!
Target attained! Wala nasayang akong Sabado na wala ko ka-uban sa RONIN ug NPAD sa Samal games.

Mag inilugay gyud ang RONIN ug gamit aning BIATCH AUG!!!


ps--Duda nako, dili mudugay ang stock marui piston body and/or gears sa ingon-ani na ROF! Pugsit ni dayon ba... paspas 'ra gyud kaayo... we'll be needing an ANGEL or Deep Fire PB soon...

[GANCHO]

YEAH BABY!! WE HAVE A BIATCH GUN!! LOL

[SANDMAN]

First beneficiary of our biatch gun si Altair ganina. Buthan siya ug fuse sa iyahang SIG, so gamit na niya ang AUG. So far so good, survive siya ug 4games sa EB ganina.

Medyo naay sabit lang ang orig niya na hop-up tungod sa ka-kusog sa ROF- so I replaced it with a Prometheus Red hop up packing.

[dipS]

wow!!!! biatch gyud!!! sling pacustom made ta kay francis.....lol

[SANDMAN]

KInsa volunteer para sa re-painting aning atong Biatch gun? Si Eric daw buhat ug hicap mags na extra-large capacity... nahuman na ko sa internals- ang painting na lang gyud ang kulang....

kinsa pud donate ug scope para dire?

[korn]

for the HI-CAP magz i need stock magz for this project for those who have magz na d na gina

gamit it would be very much appreciated kung idonate na lang ninyo..hehehe and kung gusto

nyu buy yer own hi-cap lol sa koko

[Pfc. Cj6_HawkeYe]

hahahahaha d reincarnated biatch aug, eric u've got mail...nicely done sir stan...

[SANDMAN]

Hoy... pamayad na mo mga RONIN.. naningil na ang tag-iya...

[korn]

sir yes sir....lol

[SANDMAN]

Update of RONIN who've already paid:

Sandman
Ominusha
Hryt
Jett
Harris
H.
Dips
Gundamn
Korn
===========
4,500 pesos paid...


Yung mga wala pa sa listahan- bayad na!!!

[Pfc. Cj6_HawkeYe]

tnx sir stan n ronin my balance pa ha byad na hehehehehe...hooah, my libre kiss yan sa behind hehehehehe

[SANDMAN]

Bump ko 'tong thread na 'to sirs para sa mga di pa naka-bayad ng contributions nila. Hehehe....

And I have a new proposal for the Team...

No matter how great our Biatch AUG is... (lahat ng gumamit napa-bilib), I feel that an M4 based AEG will be a better BIATCH AEG for our team for the following reasons:

1. More Ronin members have M4 based AEGs than any other type of AEG- meaning... sagana tayo sa spare mags ng M4.

2. Mas sanay ang karamihan sa handling/ergonomics ng M4 type AEG.

3. Mas kelangan na natin ngayon ng shorty/cqb type AEG dahil mas madalas na tayo maglaro sa CQB/SPEEDBALL type games.

4. Mas marami tayong spare parts/accessories for ver2/M4 type AEGs. Mas madali ang repair/maintenance natin.

Here is my suggestion....

We sell our TM AUG and replace her with TWO ACM Metal Gearbox AEGs! We can set the price of our TM AEG @ 10,000.00(para mabawi ko yung mga parts na "donated" ko sa kanya) giving us more than enough to buy TWO JG M4 type AEGs.

What say you guys?

[korn]

hmmm

i think its a good idea....its much better to have two spare guns in our

armory....

i concur.