P90 Exclusive Parts & Accessories

[BRO SARGE]

Bros,

I just want to let you know that I have some consumable parts of our beloved gun which are a bit hard to find.

I have the following:


Angel Tappet Plate (Ver 6) - 2 pcs
Guarder Tappet Plate (Ver 6) - 0 Pc
King Arms (Red) Tappet Plate (Ver 6) - 2 Pcs

Systema Metal Bushing Set (Ver 6) - 2 Sets

Systema Nozzle (Ver 6) - 1 Pc
Head 1950 TN Nozzle (Ver 6) - 1 pc

J-Type Batter NiCD 1700mAh - 1 Pc
BNEW TM P90 Hop-UP Assy - 1 Set (Plastics Parts Only)


TM P90 Stock Magazines - 3 Pcs (Slightly Used & Good Condition)
TM P90 Hi-Cap Magazines - 4 Pcs (Slightly Used & Good Condition)


The parts are really meant for personal back up but if anyone of you would be needing any of the parts, please pm me. Am not doing this for business, but it's much more on helping all the P90/Thompson users source the Ver 6 GB Parts which are usually not readily available

I hope this helps.

Thanks,
Bro Sarge

[johnmkt]

brosarge said:

Bros,

I just want to let you know that I have some consumable parts of our beloved gun which are exclusive.

I have the following:

Guarder Tappet Plate - 3 Pcs
Angel Tappet Plate - 1 Pc
Systema Metal Bushing Set - 2 Sets
Systema Nozzle - 2 Pcs
Systema Cylinder Head - 1 Pc
Systema Spring Guide Ver II - 1 Pc

These are really meant for personal back up but if anyone of you would be needing any of the parts, please pm me. Am not doing this for business, but it's much more on helping all the P90 users to have access to hard-to-find parts.

I hope this helps.

Thanks,
Bro Sarge

thanks for the info sarge.

[SANDMAN]

It would be a good idea to look for spare P90 hop up assemblies(complete) too.

THis way, you can install a longger barrel on the spare hop up assembly so that you can change barrels in a flash if needed. You'll simply remove the upper recvr, remove the orig barrel/hop assy and install the new one... VIOLA- instant long barrel P90.. just cover the longer inner barrel with a suppressor and you're all set. NO more fidling with the tiny hop assy parts...

[rpg]

Sirs, do you thinks it's a good idea to stock up on P90 metal bushings? I'm thinking of doing this but some say there's no need because parts are available.

[SANDMAN]

NO probs on the metal bushings- they'll probably be around for quite a while since even the TM THOMPSON also use these...

[rpg]

That's what I think nga eh. It might be on a per-order basis that's why I'm thinking keeping bushings on stock. What other parts should I keep on stock?

[SANDMAN]

YOu only need bushings ONCE - specialy since these are usualy high-quality bushings from systema or prometheus. They usualy last the lifetime of your AEG unless you've got a very powerful setup using helical gears(these eat up shims and bushings).

for spare parts- I suggest the FF"

1. Anti Reverse latch- they bend and break over time and it's VER6 specific.
2. Tappet Plate- broke one already- might break one again.. you'll never know...
3. Cylinder head- ver6 specific- you'll need a spare if you use strong springs(M140-above)
4. Airseal nozzle- usually lasts the lifetime of the AEG- but a jammed BB can ruin your nozzle easily.

[rpg]

Thanks sir stan.

[Nitro]

stansuarez said:

It would be a good idea to look for spare P90 hop up assemblies(complete) too.
... VIOLA- instant long barrel P90..

Good day Sir Stan. This is exactly what i had in mind when i started learning to disassemble the P90. Does anyone have an idea how much this will cost? Availability?

[9th]

;D ;D

[9th]

thanks bro sarge!

jojo

[BRO SARGE]

List Updated

[Praetor]

Does anyone have this sling:




Whole article here:
www.arniesairsoft.co.uk/?filnavn=/reviews/tm_p90/../../projects/sg1_p90_sling/sg1_p90_sling.htm

[BRO SARGE]

List above updated.

Thanks,
BroSarge

[Praetor]

Sir BroSarge, thanks for the dropleg magpouch!!

La ka ba nyang SG1 sling? I'm using an A-type sling now, kaya lang baka maputol ko yung lagayan ng sling sa baba e. Mukhang manipis.