Post by SANDMAN on Jul 29, 2007 23:00:39 GMT 8
Balik ACM na ako. Sa ACM(All China Made) ako nagsimula, at dito din ako magtatapos(naks)!
Since I've had my fun probing the FPS limits of my AUG last year during the open-chrono phase of 1AD, and I've already done high ROF setups with my P90- I decided that it was time to try and break another "boundary". That of the peso/performance boundary.
What better time to try something like this than now that the JG phenomenon is here.
I decided to get a JG G36c for my project. It offered a lot of features that I needed to round-out my armory. Among them:
1. Low price(4,800 tag price at QTS and still dropping in Manila)
2. Good quality- external/internal finish and build is comparable to CA/TM.
3. Small size- since majority of our games are now CQB/SPEEDBALL type.
4. Sturdy ver3 gearbox
5. Large magazine capacity(400rounds)
6. Inexpensive and easily available spare mags(a major handicap with my current AUG and P90)
7. Future upgrade to BOX mag
Here is my new Baby with a few old and unused upgrade parts that I had lying around.
Clockwise from 12 o-clock:
Sector chip- which I did not need later becuse the G36c already came WITH a sector chip installed!
Shims
CA STU Spur gear
Stock TM piston head and o-ring
Hop packing(TM or systema- i forgot)
TM Cylinder grease
TM Type 2 cylinder
Used SP130 spring(420fps na lang sya sa AUG)
Systema bushings- 4pcs solid +2pcs bearing for the bevel.
Spring guide with bearing
Here is the stock chrono reading with .20gm BBs.
As far as JG products go, medyo LEMON na nga 'to sa lagay na yan eh. Most JG G36 units would easily chrono from 360-380fps. WIth some exceptional samples even hitting 400+fps STOCK!
...to be continued... uploading pics...
Since I've had my fun probing the FPS limits of my AUG last year during the open-chrono phase of 1AD, and I've already done high ROF setups with my P90- I decided that it was time to try and break another "boundary". That of the peso/performance boundary.
What better time to try something like this than now that the JG phenomenon is here.
I decided to get a JG G36c for my project. It offered a lot of features that I needed to round-out my armory. Among them:
1. Low price(4,800 tag price at QTS and still dropping in Manila)
2. Good quality- external/internal finish and build is comparable to CA/TM.
3. Small size- since majority of our games are now CQB/SPEEDBALL type.
4. Sturdy ver3 gearbox
5. Large magazine capacity(400rounds)
6. Inexpensive and easily available spare mags(a major handicap with my current AUG and P90)
7. Future upgrade to BOX mag
Here is my new Baby with a few old and unused upgrade parts that I had lying around.
Clockwise from 12 o-clock:
Sector chip- which I did not need later becuse the G36c already came WITH a sector chip installed!
Shims
CA STU Spur gear
Stock TM piston head and o-ring
Hop packing(TM or systema- i forgot)
TM Cylinder grease
TM Type 2 cylinder
Used SP130 spring(420fps na lang sya sa AUG)
Systema bushings- 4pcs solid +2pcs bearing for the bevel.
Spring guide with bearing
Here is the stock chrono reading with .20gm BBs.
As far as JG products go, medyo LEMON na nga 'to sa lagay na yan eh. Most JG G36 units would easily chrono from 360-380fps. WIth some exceptional samples even hitting 400+fps STOCK!
...to be continued... uploading pics...