|
|
Post by ROSCOE on Nov 1, 2007 22:38:02 GMT 8
i had stumbled upon this o-ring which has a different design. it came along with the piston set that i had recently purchased. it has a slit/groove within its inside diameter and was wondering on what's the purpose of this design concept. does anyone have any ideas? here are the pics i took of the o-ring.   i couldn't make a review out of it if it would result to a fps gain or stable fps readings due to better sealing of the cylinder set. i was more interested with the installation of the new piston body and the old o-ring installed in my gun still does its job well. its just recently that i had discovered about this o-ring after cleaning my toolbox. if any of you guys have inputs regarding this o-ring please do share. kay kapoy baklas ug baril just to make a review. hehehe. ;D ;D |
|
|
|
Post by 9th on Nov 2, 2007 6:21:35 GMT 8
hala ka....murag pangbalot sa manubela ;D
|
|
|
|
Post by ROSCOE on Nov 2, 2007 8:06:32 GMT 8
murag pambalot bitaw sir noh hehehe.
but you'd be surprised on where i got
this from. it came from a well known
brand.
;D ;D
|
|
LT. diablo
Moderator-1 
High SPEED, Low DRAG.....
Posts: 464
|
Post by LT. diablo on Nov 2, 2007 10:05:18 GMT 8
I think its for air to force the o-ring to the cylinder for more seal.. since the incoming piston that was released will compress the air, this cavity inside tends to expand when compressed air is applied.. making the o-ring flexible for sealing.. nice concept but would it be durable enough for a long time? For the safe side, try to use the same old o-rings, but for curiosity, it wouldnt hurt to try.. ;D
|
|
|
|
Post by ZeeZeeTop on Nov 2, 2007 11:39:14 GMT 8
hala ka! may dwende na nawalan ng pambalot ng steering wheel ng sasakyan nya!  |
|
|
|
Post by ☼-DÉÅTH DEÅLER-☼ on Nov 2, 2007 13:45:06 GMT 8
baklasin mo na baril m at gawan mo ng review pre! hehehe ;D
|
|
LT. diablo
Moderator-1
High SPEED, Low DRAG.....
Posts: 464
|
Post by LT. diablo on Nov 2, 2007 17:21:37 GMT 8
KAy mykzxz na lang i try.. hehee. ato himuon guinea pig iya gun para ma try.. ;D
|
|
|
|
Post by Delta_Shrek on Nov 2, 2007 19:08:52 GMT 8
murag gikan na sa ICS? ;D
|
|
|
|
Post by ROSCOE on Nov 2, 2007 22:27:53 GMT 8
murag gikan na sa ICS? ;D hindi ICS to sir. baklasin mo na baril m at gawan mo ng review pre! hehehe ;D kapoy baklas myxkz... but im pretty sure mas ok performance nito kaysa double oring piston head na binili mo bwehehehe. |
|
|
|
Post by GANCHO on Nov 2, 2007 22:37:15 GMT 8
tingin ko naga make sense yung design ng o-ring,pero mag work lng yan sa mga ported na piston head, parang yung space sa gitna kay mag catch ng air then mag expand ang o-ring para ma sara lahat ng butas around the o-ring
|
|
|
|
Post by ROSCOE on Nov 3, 2007 11:12:36 GMT 8
tingin ko naga make sense yung design ng o-ring,pero mag work lng yan sa mga ported na piston head, parang yung space sa gitna kay mag catch ng air then mag expand ang o-ring para ma sara lahat ng butas around the o-ring puwede rin pao. pro yung piston head na kasama niya hindi ported hahaha! |
|
|
|
Post by the_bangus on Nov 3, 2007 14:48:30 GMT 8
ganyan din design nung oring sa piston head ng hurricane tune up kit. wala man masyado difference. nung nagpalit ako ng area1000 na piston head na old style yung o-ring. same lang fps. walang gain walang loss... ;D
|
|
|
|
Post by Oakley ( Ka Ryan ) on Nov 8, 2007 10:13:00 GMT 8
So far ICS lang ang meron nyan sir yung Pre-upgraded by Techpro. Meron ako nyan ICs kasi beng2 ko.
|
|
|
|
Post by daroyski on Nov 8, 2007 11:38:08 GMT 8
Yan yata yung tinatawag nila na dome type O-ring
|
|
|
|
Post by filakairsoft on Nov 14, 2007 15:56:48 GMT 8
kibitz me, mga kasama?
most probably designed to improve the performance ng o-ring. if you do a search for o-ring mats/designs you will probably come across different shapes for different applications. hindi pa yan masyadong ginagamit sa ersop so this split o-rings may be the start of a significant trend.
|
|
