|
Post by denski on Apr 23, 2006 9:50:38 GMT 8
Guarder blue full tooth piston Systema torque up flat gears Systema Metal bushings Spring guide with bearing Piston head with bearing Cylinder head ver 3 PDI190% 510mm tight barrel 6.03 Metal hop mechanism Metal nozzle 9.6V 1500 Sanyo mini battery 25amp fuse Customized gearbox protective plate Gearbox dynamat sound proofing
165feet precision accuracy.
|
|
|
Post by jpopc on Apr 23, 2006 19:44:36 GMT 8
hahah c marvin magaling mag snipe yan....
hahah.....
|
|
|
Post by Pfc. Cj6_HawkeYe on Apr 24, 2006 10:23:24 GMT 8
;D sir denks-tnx very much for giving a detailed 1 n 4 sharing it to me...very helpful tlaga ang airsoft community, r u using a psg1 iner barel sir...tnx.
|
|
|
Post by denski on Apr 24, 2006 13:05:41 GMT 8
Not in my aug but I'm using one in my MSSR.
|
|
|
Post by Pfc. Cj6_HawkeYe on Apr 24, 2006 16:41:44 GMT 8
sir wat type of barel gmit mo sa aug...gmtan ko sana ng psg1 iner barel 650mm 6.03 oks lng ba...tnx, tnx, tnx, tnx agen sir.
|
|
|
Post by denski on Apr 24, 2006 20:10:58 GMT 8
As I said above: 510mm 6.03 TB
If I use 650mm, I will be shooting above 450fps. Its not allowed in my group anymore.
Its better if your gun shoots above 400fps because bore up cylinder works better. And hangging the extra lenght barrel inside a silencer isnt really good for your accuracy. You have to stabilize it to prohibit barrel vibration.
650mm - 509mm = 141mm more
If your gun is not upgraded properly for that, instead of adding fps, precision and range... you might be losing it.
|
|
chris
Moderator-1
MP5 Club Mod
Posts: 789
|
Post by chris on Apr 24, 2006 20:18:21 GMT 8
sir denski what is the fps of your current setup? and how do you stabilize the barrel vibration?
|
|
|
Post by denski on Apr 24, 2006 20:24:36 GMT 8
425fps using .25 gram bb... If i was using .20 then it would be 450fps. My current barrel doesnt exceed the outer barrel and so it rests stabley. If i was using a psg1 TB barrel, the excess barrel that sticks out will be a problem. I will have to stabilize it someway by stuffing cork shavings in the silencer I'm using to hide this extension or cotton balls.
|
|
|
Post by snyper on Apr 25, 2006 3:03:12 GMT 8
Sir denskie,
Since this is mostly an ACM thread, I would like to know if you have any first hand info on any ACM BASR's. Correct me if I am wrong some ACM marketed in the US carry the UTG brand. I have seen the UTG-M324S and retails for about $90. I know you would recommend the more popular (branded) ones, But I believe, for the sake of those whose budget is limited this may be an option. Just haven't found any review if it is compatible with after market parts.
Sana meron nito dito.
|
|
|
Post by Pfc. Cj6_HawkeYe on Apr 25, 2006 8:00:08 GMT 8
tnx sir denks...so do i hve 2 buy an inner barrel o oks na stock barrel ko sa aug...il just put a silencer nlng...very helpful tnx.
|
|
|
Post by denski on Apr 25, 2006 11:01:30 GMT 8
Snyper:
Actually I do read reviews on these UTG rifles. No first hand experience though (as if I'm going to lower myself to buy one of those hehehe). Its unupgradeable. Its shoots lousy and your better off with a VSR (you can upgrade VSR to 400fps with just a spring upgrade).
Do not believe every review you read from the states about these types of guns. Most of them are done by little children who arent qualified to make reviews in the first place. Trust me, i handle a large US based airsoft information site. Go to airsoftcore. We have the most extensive sniper rifle and tactics discussion around. Try asking about the utg... hehehe you will get flamed by the snipers hanging around there. They hate that rifle.. aside from the super 9.
Its basically a springer gun. Now, put that against ACM guns you guys have frankenstiened. You already are at a disadvantage with one shot one kill... it will further disadvantage you with inaccuracy. It has a weak stock and weak internals.
The UTG-M32 is good if you play with guys that only have 280fps or less. Out of the box its 400fps (I think... have to re-confirm this)... so 100fps advantage is good if thats the case.
You want to go cheap? I suggest you look into mk1 carbine rifles. You can convert that to pistol if you find the sniping is not your playtype. Its gas though.... but still considered a BASR. its upgradeable to 500fps. Most importantly.... Its cheap, upgradeable and durable.
Doleomorior:
How good do you want your Aug to shoot?
Silencers dont do anything for performance. Working silncers only silence bb exit sound. You still have to contend with motor and piston slamming sound if you want to silence your gun. There are two ways of silencing your gun... both must be done... muffle bb exit sound and muffle gearbox sound.
|
|
|
Post by Pfc. Cj6_HawkeYe on Apr 25, 2006 15:29:02 GMT 8
sir just like yours if dats a ok...at 165 feet precision acuracy...4 now my upgrades are CA torque up flat gears, spring guide & spring pdi190%...ill just go slow on upgrading hehehe... how will dat perfrom sir, ang barrel dpat palitan anong clase din...tnx2 ano din pala gamit mo na guarder blue full tooth piston sir,aluminum o polycarb lng...tnx2 agen.
|
|
|
Post by denski on Apr 26, 2006 7:52:25 GMT 8
Polycarb actually. Aluminum is not very good for the gearbox... it slams too hard on it. If you get the same upgrades as mine, you can get the same precision. There is nothing magical about my gun. If my gun can do it, so can yours. It just depends on what you put in your AEG.
If you have those already installed then I suggest buying a tightbarrel (6.05, 6.04 or 6.03). Then most importantly... use good bbs.
I use .25gram bbs. Its not affected by wind factor as much as .20g. My tight barrel is systema 6.03 510mm m16 (aug barrels are 509mm).
Then I suggest you get a metal hop mech upgrade. The stock hop mechanism of the aug isnt very reliable. It sometimes move on on its own on gameplay.... ruining your accuracy. Thats why I suggested that putting some kind of removeable glue on the hop dial to lock it in place.
Then somethings I've done to stabilize the mechbox... I've put a millimeter thick piece of felt paper and propped it between the gearbox rear and the gearbox protective plate. In improper up reinstalling of the gearbox... the gearbox moves to and fro, giving off inconsistent air through the inner barrel.
|
|
|
Post by Pfc. Cj6_HawkeYe on Apr 26, 2006 8:43:22 GMT 8
im not as good as anyone who snipes, but i love 2 engage in long distance w/ precise acuracy...tnx sir very helpful...tnx din 4 sharing the upgrades 4 me...2 thumbs up
|
|
|
Post by denski on Apr 26, 2006 11:37:42 GMT 8
No problem. I'm just passing off information I've learned from vets through the years. Some of them I've used and confirmed. Some of them I've debunked.
There is another way of stabilizing the gearbox though, but it is hard to explain with out pictures. I havent used/done it yet. My aug is working perfectly fine and as they say: do not fix things that arent broken. Search for it in FAS. Look for WAPZ. There is a detailed step by step instruction on how to do it (with pictures). It involves sticking a piece of paper just behind the hop mechanism.... or was it the tappet plate... I'm not sure anymore... have to re-confirm this. I read it a long time ago.
|
|