|
Post by snyper on Oct 24, 2006 16:00:25 GMT 8
Sayang sir. Di ko nakita ang baby ni Rommel nung dumaan sya sa GNR for chrono testing... naka tight barrel na ba yun sir?
RJC- congrats sa bagong baby mo.. na unahan mo pa si sherwin sa upgraded BASR. Ser sandman, Upgrades used: EDGI's bull barrel and Cylinder upgrade kit with an SP02 spring. Replaced trigger sear, spring guide stopper and bolt handle. Resulting FPS: 500 FPS average. On .20 bb's Range : two-and-a-half post-distance (subdivision) using .28 bb's Accuracy: You could hit a man sized target at that distance easily. Will do more tweaks as the upgrade is supposed to be able to reach more than 500 fps.
|
|
|
Post by snyper on Dec 20, 2006 9:11:08 GMT 8
Hi peeps, just want to share an alternative on the M50 cylinder upgrade. My objective in this project was to initially be able to upgrade the weak cylinder of the M50 and also bring it somewhere in the 500FPS range without spending so much and at the same time use as much of the stock part as possible. To start with I just wanted to replace my worn out stock cylinder with a brass one. But it came out that the brass tube I got has a bigger ID and will not allow me to use the stock end pieces (nozzle and bolt end) of the cylinder. So we made a whole new cyclinder set. And while at it made some modifications on the piston. Below is what we have come up with: The piston is very silent is very silent when fired. It still uses the stock spring, will chrono it first and replace with a harder spring. Will see how it goes. Below is the close-up of the piston. This is just an RD project which I intend to apply on newer BASR's like my MP001 or the L96 when I get to buy one. hehehe. . . .
|
|
|
Post by miklo on Dec 20, 2006 19:10:28 GMT 8
yipee! kasunod na ang mp001!
|
|