|
Post by 9th on May 10, 2008 3:57:14 GMT 8
|
|
LT. diablo
Moderator-1
High SPEED, Low DRAG.....
Posts: 464
|
Post by LT. diablo on May 10, 2008 11:49:38 GMT 8
maka hilak jud ka sa sugod ana sir jo..
|
|
LT. diablo
Moderator-1
High SPEED, Low DRAG.....
Posts: 464
|
Post by LT. diablo on May 10, 2008 19:05:53 GMT 8
kaayu isr jo.. I see you have a broken tappet plate.. BTW.. i have something to add sir jo.. You can remove the gearbox without necessarily removing the innerbarel and hop assembly.remove reciever screws and retaining springs and lift it first at the motor area.. its smooth as a criminal to remove.. ;D
|
|
|
Post by SANDMAN on May 10, 2008 20:46:53 GMT 8
Ah the memories.....
|
|
|
Post by 9th on May 10, 2008 21:10:05 GMT 8
kaayu isr jo.. I see you have a broken tappet plate.. maybe because we used this aeg once in a blue moon. BTW.. i have something to add sir jo.. You can remove the gearbox without necessarily removing the innerbarel and hop assembly.remove reciever screws and retaining springs and lift it first at the motor area.. its smooth as a criminal to remove.. ;D yes thanks, but i want to check also the hop assembly
|
|
|
Post by skindred on May 13, 2008 9:23:45 GMT 8
after 1000000000 years.... na open na rin sa wakas ang m14 yipeeee! then do it all over again putting it all back in.... good luck. hehehehe.
|
|
|
Post by 9th on May 13, 2008 20:43:56 GMT 8
after 1000000000 years.... na open na rin sa wakas ang m14 yipeeee! . actually 3x na sir ;D 1st upgrade nearly 2 years ago na to metal bushing/shims, sp120 and steel sector gears, si sir Lester pa ang nag virginized nito sir. 2nd minimal upgrade to tight barrel prior ASG tourney last month by sir mikz. 3rd karon ako na, kay nabali ang tappet plate
|
|
|
Post by miklo on May 13, 2008 21:05:56 GMT 8
sir....try mo teflon fix ung hop rubber....tataas pa yan....pwamis!
|
|
|
Post by 9th on May 14, 2008 2:20:59 GMT 8
Thanks brother mikz. I thought mayroon na, di ko na sana buksan. ('bat di mo nalagyan ng teflon? )
|
|
|
Post by miklo on May 15, 2008 20:40:42 GMT 8
Thanks brother mikz. I thought mayroon na, di ko na sana buksan. ('bat di mo nalagyan ng teflon? ) para meron kang ayusin....hehehe
(nahutdan ko bro....dili man pud ka musugot celophane ako ibutang)
|
|
|
Post by 9th on May 16, 2008 1:41:30 GMT 8
|
|
LT. diablo
Moderator-1
High SPEED, Low DRAG.....
Posts: 464
|
Post by LT. diablo on May 16, 2008 1:45:51 GMT 8
BTW sir jo, unsa chrono reading sa SP120 sa imu M14? ang settled PDI190 did 442-448 fps stable sa amu kauban. Did I miss something or is it enuf?
|
|
|
Post by 9th on May 17, 2008 2:06:44 GMT 8
Kalimot na ko sir 'van.
|
|