|
Post by daroyski on Nov 21, 2008 11:37:26 GMT 8
If you need to store your lipoly batteries, we would like to help you make sure they are fresh the next time you need to use them. Li-Poly batteries do not handle being left in a fully charged or discharged state over an extended period.
To insure your lipo batteries do not loose capacity while left unused, please follow these basic steps:
1. Place your lipoly battery in a LipoSack 2. Charge the lithium polymer battery pack for storage to between 3.8V and 3.9V per cell (if your charger does not allow you to set the termination voltage, you can also fully charge the battery, and then discharge the battery to between 40-60% of its capacity. An awesome programmable lipoly charger is the Thunder Power 1010C) 3. Check the voltage of your lithium polymer batteries with a Digital Multi Meter once a month while they are in storage 4. Re-charge and balance your lipos as necessary to keep them between 3.8V and 3.9V per cell 5. Keep lithium polymer batteries inside the LipoSack and stored in a cool, dry place with a stable temperature of between 40 and 70 degrees F (4 to 21 degrees C)
When you need to use your lithium polymer batteries again, fully charge the lipo pack and it will be ready to go. Following the 5 easy steps above will help extend the life of your valued lipo batteries.
*http://www.rctoys.com/pr/2007/09/25/lithium-polymer-battery-winter-storage-lipo-care-lipoly/
|
|
|
Post by glock24_maxi on Jan 4, 2009 22:25:30 GMT 8
|
|
|
Post by 9th on Jan 5, 2009 0:54:26 GMT 8
|
|
|
Post by calicot on Jan 13, 2009 21:46:52 GMT 8
nice very informative.
|
|