DIY Pistol Lanyard

[9th]

Blackhawk

Worth Php1800

TriTech TRRL PISTOL LANYARD
(with Tactical Belt Loop)

Worth Php1900

DIY?
Worth 1/5

• Used Cellphone Car Charger, large size cord the better, or using a used motorcycle key lanyard (of course a color black), or unused car roof mounted emergency flasher coil cord
  
• Small solid wire, i got mine from junked Cat5 cable, or a used solid telephone wire
  
• Adhesive, bulldog brand
  
• Shrink wrap
  
• Used ID Card holder, or spare paracord(black), or unused black shoelace.
  
• Extra small belt with plastic attachment from my unused rifle sling
  
• A lighter, or candle
  
• Pliers, Cutter, Scissor, or a multi tools can use
  

Cut both end of CP Car Charger Cord


Bend both end and make a loop, approx 1/2 inch
Attach the ID Card holder and fasten using solid wire


Insert shrink wrap first and attach the small belt to other end, fasten using solid wire



Coat wire wraps with adhesive




Let it dry


Cover wires with shrink wrap


Heat using lighter or candle

Finished product!


Testing!



Torture test using same weight of my pistol, throwing as hard as i can, PASSED!

Done!

[9th]

Ok I bought a Taiwan-made pistol Lanyard worth 600.
Used two games only...
DAMAGED COIL... :-\ :-\ :-\ :-\


Now, How to repair using minimal expenses?
Bought Electric Guitar Coiled Audio Shielded Wire for 150.


A little bit smaller than the original,

But far better, What inside the "spiral" audio cord, stranded "center" wire for "hot" side and stranded wires for shielded ground unlike the original I bought.

Repair: Almost same procedure, except I did not use instant adhesive.
Wrap using Lan Cable.


One thing different from original, I put the paracord to both end.


Shrink wrap


Here's the original belt wrap



Done!

[9th]

Another procedure how to wrap the paracord using a magnetic wire:


Shrinkwrap:


So out of this cable,

I can make 4 lanyards,