|
Post by downhiller67 on Jun 3, 2006 18:14:28 GMT 8
good day mga guru's
ask lang po sana why my TM MP5 is suffering from bb clogging up after nag changes po ako ng systema airseal nozzle, ano po kaya problema ng unit ko. thanks po sa mga magreply.
|
|
|
Post by El Gato Negro on Jun 5, 2006 11:54:11 GMT 8
saan nag clog sir? correct me if im wrong. baka mahaba yong nozzle, kaya nde nag load yong bb kc mahaba ang nozzle. try to compare the stock nozzle and the airseal.
|
|
|
Post by the_bangus on Jun 5, 2006 23:12:19 GMT 8
i compare niyo po yung stock niyo na nozzle sa bago ninyong nozzle.. kung masmahaba ang bago i file down niyo hanggang pumantay sa stock.. ingat lang!
|
|
|
Post by downhiller67 on Jun 6, 2006 9:02:19 GMT 8
il check it sir, salamat sa mga replies
|
|
|
Post by miklo on Jun 6, 2006 13:24:03 GMT 8
dapat sir pang mp5 din ung nozzle nyo...baka iba ung nozzle nyo kaya mahaba. check nyo po ang porma...dapat pareho....kung hindi siya pang mp5...baka dyan magcause ng airleak.
|
|
|
Post by El Gato Negro on Jun 6, 2006 13:42:00 GMT 8
and check your nozzle kung fit sa cylnder head. another cause of airleak kung maluwag.
|
|
|
Post by downhiller67 on Jun 7, 2006 16:46:27 GMT 8
thanx sa lahat nagreply, problem solve mga sir, the systema airseal nozzle is a little bit longer than my stock nozzle, so i followed the advise to sand down about 1 mm. and there it goes.. flawless na po ang mga BB's.
thanx and have a nice day...
|
|