|
low fps
Jul 12, 2006 10:10:00 GMT 8
Post by Delta_Shrek on Jul 12, 2006 10:10:00 GMT 8
mga mp5 peeps, ung r5 ko naga low fps... here's my set up: SP120 metal shims and bushings stock Well gears, Well spring guide, Well piston body marui pisten head - ported Modify airseal nozzle Binalik ko from a SRC cylinder to stock Well cylinder... Still low fps.... HEEELLLPPPP
|
|
|
low fps
Jul 12, 2006 16:53:00 GMT 8
Post by miklo on Jul 12, 2006 16:53:00 GMT 8
gaano kababa ang fps sir? have you tried the compression test - remove the spring & spring guide then try moving the piston back/forth while blocking the airseal nozzle. malalaman nyo kung hungaw & from there, try to eliminate the airleaks.
|
|
chris
Moderator-1
MP5 Club Mod
Posts: 789
|
low fps
Jul 12, 2006 19:44:19 GMT 8
Post by chris on Jul 12, 2006 19:44:19 GMT 8
ilan po ba fps nyan sir?
|
|
|
low fps
Jul 13, 2006 10:27:01 GMT 8
Post by Delta_Shrek on Jul 13, 2006 10:27:01 GMT 8
okay ang compression... from 335 it dropped to 297 to 298 fps!!!!! kahit ako nagulat dun...
|
|
|
low fps
Jul 14, 2006 18:05:19 GMT 8
Post by daroyski on Jul 14, 2006 18:05:19 GMT 8
have you checked the o-ring?
|
|
|
Post by Delta_Shrek on Jul 15, 2006 9:12:18 GMT 8
yup sir... i got one of those red ones....
|
|
chris
Moderator-1
MP5 Club Mod
Posts: 789
|
low fps
Jul 15, 2006 21:33:31 GMT 8
Post by chris on Jul 15, 2006 21:33:31 GMT 8
kung okay ang compression, nasa hop yan.. try to have it checked out by a gunsmith kung di talaga kaya..
|
|
|
low fps
Jul 17, 2006 10:52:01 GMT 8
Post by Delta_Shrek on Jul 17, 2006 10:52:01 GMT 8
ok sir thanx i'll have it ooked over by...... ;D
|
|