Cookie¿
Moderator-1 
Team C.A.D.G. Moderator
C.A.D.G!!!
Posts: 76
|
Post by Cookie¿ on Aug 11, 2006 9:41:51 GMT 8
sino marunong mag modify nito??
nag mimisfeed kasi sa akin ehhh...
eto set-up ng unit ko
CA CQB
(limot na brand) 6.04 tight barrel
systema STU gear
sp140
deap fire piston
CA Bore-up kit
EG1000
newly shimmed
CA spring guied w/ bearing
9.6v 3600mah sub-c
thanks...
|
|
|
|
Post by 1,000,000,000,000.95™ on Aug 11, 2006 10:49:03 GMT 8
|
|
Cookie¿
Moderator-1
Team C.A.D.G. Moderator
C.A.D.G!!!
Posts: 76
|
Post by Cookie¿ on Aug 11, 2006 10:53:31 GMT 8
batt lang ang papalitan??? wala na sa internals ng mga sensor nya???
|
|
Cookie¿
Moderator-1
Team C.A.D.G. Moderator
C.A.D.G!!!
Posts: 76
|
Post by Cookie¿ on Aug 29, 2006 19:27:42 GMT 8
well na change ko na ang bat, total of 9v na gamit ko sa S-Mag ko, nag mimisfeed parin...
nalaman ko lng pala na hnd dapat mag full auto for long periods of time... nung pag ka tapos palang sa 1st day ng swat tourney, na sira ang piston head at piston body dahil na init, muliit ang piston ng lumalim ang teeth ng piston... i was force to downgrade my fathers aeg para sa 2nd day... nag full auto nlng ako for 4-6 seconds, ako kasi gunner ng groupo namin...
|
|
|
|
Post by emerald7 on Sept 28, 2006 13:33:24 GMT 8
Cookie, Kung M4Cqb gamit mo at base sa set up mo @sp140 Bore up Stu gears,Deepfire,eg1000@9.6v at nag mimisfeed. Do this- Fire continuesly, if there is a Misfeed once or twice many times: >Check the Nozzle length- shorten by 0.1cm gradually until no misfeed.(but im not sure what nozzle you are using) By doing this, if there are no more misfeed, lower down your Spring from sp140 down to 130 if not 120, this will increase lifespan of stu and piston body, you are already using Bore up right? sp 120 should be 460+ and as a Gunner we dont need higher spring this will limit our efficiency in our team because of aeg problems. Re.smag try to check your smag with another friends gun that dont misfeed, if it does misfeed . >Check internal passage if its clean, if its dirty, clean it.if there is still misfeed. >use lighter bbs i.e .20g, if you used .25g up and started to misfeed,pls read next option. >Check the strenght of the spring of the mag. if its soft already, replace it. Hope this would help.  |
|
|
|
Post by chikosayah on Oct 20, 2006 8:21:06 GMT 8
Sir check mo yung hop up mo. Specially the rubber.
I had d same problem,ngayon wala na using wmag hero arms auto.
|
|
Cookie¿
Moderator-1
Team C.A.D.G. Moderator
C.A.D.G!!!
Posts: 76
|
Post by Cookie¿ on Oct 20, 2006 13:04:13 GMT 8
na solve ko na misfeed ng smag.
i just added 4 more batteries and a hi-speed motor from a "lets go or Tamiya toys"
|
|
