|
Post by gundamn on Jun 20, 2005 17:08:57 GMT 8
I'm planning to re-paint my ACM's, can anybody here give me some points on what are the proper procedure on re-paintung your ACM.
Also, what type of paint to use and where to buy..
Thanks
|
|
|
Post by SANDMAN on Jun 21, 2005 1:13:17 GMT 8
Use acrylic epoxy based paints sir Gundamn. Avoid automotive laquers kasi they will MELT the plastic of your gun. Pwde kang gumamit ng Pylox basta meron ka lang primer muna. Swerte ka kung mahanap mo yung Krylon na "camoflage series" na paints- meron daw nito sa manila eh. Perfect match talga para sa mga bengbengs natin! Paint using thin coats and allow 10-20 mins drying between coatings. Start pressing the nozzle AWAY from your gun the sweep the spary across your gun and stop pressing when the nozzle is pointed AWAY from the gun. If you start or stop pressing the nozzle of the spray paint when it is pointed at your gun- magkakaroon ng SPLATTERS. If it's your first time. Practice painting something else first- like a piece of wood or plastic(praktis ako sa mag-loader ng steyr ko).
|
|
|
Post by gundamn on Jun 21, 2005 9:42:59 GMT 8
Thanks.
Highly appreciated yung tip mo sir stan.
Ika nga nila "Practice makes perfect" :-)
|
|
|
Post by ROSCOE on Oct 19, 2005 10:11:31 GMT 8
|
|