Post by covert ops on Mar 27, 2008 11:25:31 GMT 8
Product Feature
- Can charge directly 1-4 cells (in series) Li-polymer batteries with safety
- Charger for 3.7v ·ª 14.8v. Li-polymer battery
-WITH FAN
-AUTO CUT OFF
- ITS A BALANCER/CHARGER
Specification
- Input voltage range: 12-18v. DC
- Output current: 0.2-1.5A
- Maximum charge time: 120 minutes safety cutoff
- Set up-down converter, 1-4 cells Li-polymer battery
- Auto adjustable charge current is 1.5A
- Size: 67mm X 47mm X 20mm
- Weight: 247g
- Color: OD GREEN
*OPTIONAL ACCESSORY
-12V-5A ADAPTER
-------------------------------------------------------------------------------------------------
HOT POWER 6106 CHARGER
Product Feature
-Optimized operating software
- Dual input power
-Individual voltage balancer for Lithium batteries inside
-Balance individual cells on discharge
-Accept various types of Lithium batter
-Lithium battery “fast” and “storage” mode
-Maximum safety
-Data store/load
-Cyclic charging/discharging
-PC based analysis using USB communication
-BUILT IN FAN
Specification
-Operating voltage range: DC 10.0~18.0 volt
- Circuit power: max.50W for charging; max.5W for discharging
- Charge current range: 0.1 ~5.0A
- Discharge current range: 0.1~1.0A
-Current drain for balancing Li-po: 300mAh/cell
-NiCd/NiMH battery cell count: 1~6 Series
-Pb battery voltage: 2 to 20V
-Weight: 400g
-Dimensions: 140 x 100 x 30 mm
-Box size: 130 x 210 x 40 mm
-box Weight: 605g
COMES WITH 12v 5A POWER SUPPLY
-----------------------------------------------------------------------------------------
3E Model SmartPlus LPC-1080 Charger
Specifications:
- Suitable Battery: Li-ion and Lipoly
- Input Voltage: 12 - 15v (The guaranteed operating range is from 11v to 15v)
- Charging Current: 1.3A Steady Current (4.2v Steady Voltage)
- LEDs: (Red: Situation Indicator) (Blue: Power)
- Power Comsumption: Less than 5w at 12v (at idle)
- Size: 140 x 80 x 31mm (excluding cords and terminals)
- Weight: 400g (0.88lbs)
--------------------------------------------------------------------------------------
IMAX-B5 Li-Polymer Balance Charger
Specification:
- Li-ion/polymer battery:1-5 cells
- Ni-MH/Cd battery:1-14 cells
- Charger rate:0.1A-5.0A
- Multifunctional battery connector
- High-power and high-performance circuit
- Maximum safety
- Delta-peak sensitivity
- Capacity limit
- Processing time limit
- Input power monitor
- Monitoring the voltage of individual cell
-COMES WITH MANUAL,ALLIGATOR CLIP
-INPUT 12-18v
-ADAPTOR INCLUDED
--------------------------------------------------------------------------------------
H-ENERGY BALANCER CHARGER
一、Characteristics:
1、Using three road independent charge methods, high charge efficiency, balancing precision can be reach to 20mV.
2、Convenient to using, single indicator in each charge path, easy for user to see the charge condition.
3、Automatically detects the voltage of the battery packs, control charge balance, ensure battery voltage balance.
4、700mA charge current, constant charge current in the initial stage ,constant voltage charge in the last stage.
5、Wide voltage input 11~15V（DC）,can use car-charger
6、Input with protective opposite pole protection, opposite connecting won’t damage the charger.
二、Specifications
·Input Voltage DC 12V~15V/1500mA
·Output charge DC 4.2V， 700mA.
·Operating temperature 0℃至40℃
·Dimension 78MM * 52MM* 22MM
·weight 72 g
COMING SOON
--------------------------------------------------------------------------------------
LIPOLY VOLTAGE METER
VOLTAGE METER BEFORE BATTERY INSTALLED
AFTER THE VOLTAGE CHECKER IS INSTALLED ON THE BALANCER PLUG
Voltage meter (for 7.4v to 11.1v Lipo)
This unit will shows like this (all digit may vary from cell to cell)
3.93v @ first cell
3.96v @ second cell
3.91v @ third cell
THESE WOULD ANSWER YOUR FREQUENT QUESTIONS
EX.
1. LOWBAT NA KAYA BATTERY KO?
PLUG MO ANG VOLTAGE CHECKER IF NASA 3.3V BELOW PER CELL MEANS MABABA NA. YOU NEED TO CHARGE YOU LIPO.(THESE WOULD HELP EXTEND THE CYCLE OF YOU BATTERY)
DONT WAIT FOR YOUR BATTERY TO BE DRAINED MASAMA SA LIPO YAN! MADALING MASIRA ;D
2. BAKIT KAYA AYAW PUMUTOK ANG FULLCHARGE LIPO KO?
PLUG MO NANAMAN ANG VOLTAGE CHECKER. PAG MAY NAKASABI NO (means no cell detected with the device) MEANING MAY SIRA NA CELL,DISCONNECTION, PCB FAILURE etc...
* FULLCHARGE IS USUALLY ON 4.2V PER CELL
*LEVELS AT 3.7 volts
*3.0V is "completely discharged" ( dropping lower than 3.0V runs the risk of permanently damaging the battery )
*BATTERY VOLTAGE MAY VARY EVEN BALANCED/CHARGED