Post by Han_Solo on Oct 19, 2008 14:12:55 GMT 8
Selling my CLASSIC ARMY AUG A1
DeepFire Titanium Full teeth piston body
DeepFire brass AUG Bore-up tight nozzle
Guarder SP130 (brandnew installed for Final Urgent Fury tourney)
Systema Type 0 Bore-Up cylinder
ICS Aluminum Bore-up piston head(silver)
CA Bore-up cylinder head(stainless double O-ring)
CA metal bearing spring guide
CA STU sector & spur, china bevel gear
CA 7mm metal bushings (brandnew installed for tourney)
CA motor(new motor, not stock)
CA hop rubber (brandnew installed for tourney)
G&G Anti reverse latch (brandnew installed for tourney)
Original CA wiring with FUSE still installed
SCS installed
*I apologize if some may vary, it's been a while since I played.
**No misfeeds as per magazine usage, sector chip not needed.
***No hairline cracks on the V3 gearbox. The front screw is lose but is clamped shut with the top slider lock & some Loctite on the screw.
Recommended upgrades:
Metal hop-up chamber. CA or G&P AUG metal hop chambers, available at Young Guns in Manila.
That is why I included a tight barrel so you can buy a new hop chamber & install it without "disturbing" the existing stock inner barrel/hop chamber assembly. The stock barrel is "sealed" with the stock plastic hop chamber & gives a chrono above 450fps with the current setup.
Selling it with:
** Click on image to zoom**
535mm CA tight barrel
7 Hicap mags
1 Orig CA, 1 Dboys, & 1 bnew Dboys bought on the Final Urgent Fury tourney. NO MISFEED.
4 Both Elephant mags. One mag misfeeds, can't remember who, what I do is just spray silicone oil & it disappears. The rest works Ok.
Not pictured is the v3 spare motor, cleaning rod & AUG manual.
Comes with box.
No external defects except for the broken front grip. You can buy one, or have the old one machined, I just don't bother because I don't use the foregrip. I mainly do rifle stance shooting with the AUG, its better to lay the barrel down on windows & obstacles without the grip anyways.
The A1 scope is the best feature of this rifle.
I use it all the time. Clear & bright. Both ends have plexi glass protection. It would be clearer & brighter if you remove it, but I don't recommend it.
Body detail.
No deep scratches, only a few minor scars. Sorry about the sticker, it would indicate the last time it was used.
Serial # & STEYR ARMS markings.
Scope metal.
The whole package, Left face.
Right face
I would not want to sell this for sentimental reasons, pero dili ko ka-afford ingon ana na luxury for now, so it has to go.
I bought this in "brandnew" condition. I am the 2nd owner though, the 1st owner did not have time to play with it yet, so dili pa jud bun-og.
I hate wobbly AEG's. I had to install shims inside to eliminate the wobble when I received it NEW. Now, this AUG does not wobble.
Factor everything, you have around 6k worth of upgrades.
Di pa kasale magazines, plus the tight barrel.
A brandnew AUG A1 would cost around 13K plus, & that is stock everything. This aeg has been conditioned for the Final Fury tourney, most small parts are brand new & have been installed a few days before the tournament.
Para sa airsofter na matagal ng gustong magka Aug, this is STILL the best AUG A1 in the market. Not to mention that the A1 is a rare model yet parts are readily available.
Selling my beloved AUG A1 for only 10K.
PM me or text 0919-309-9429
Do minimize text questions, I'll give you a landline, magastos sa text.
I don't answer unregistered numbers, please text in advance if you are calling.
Merry Christmas!
DeepFire Titanium Full teeth piston body
DeepFire brass AUG Bore-up tight nozzle
Guarder SP130 (brandnew installed for Final Urgent Fury tourney)
Systema Type 0 Bore-Up cylinder
ICS Aluminum Bore-up piston head(silver)
CA Bore-up cylinder head(stainless double O-ring)
CA metal bearing spring guide
CA STU sector & spur, china bevel gear
CA 7mm metal bushings (brandnew installed for tourney)
CA motor(new motor, not stock)
CA hop rubber (brandnew installed for tourney)
G&G Anti reverse latch (brandnew installed for tourney)
Original CA wiring with FUSE still installed
SCS installed
*I apologize if some may vary, it's been a while since I played.
**No misfeeds as per magazine usage, sector chip not needed.
***No hairline cracks on the V3 gearbox. The front screw is lose but is clamped shut with the top slider lock & some Loctite on the screw.
Recommended upgrades:
Metal hop-up chamber. CA or G&P AUG metal hop chambers, available at Young Guns in Manila.
That is why I included a tight barrel so you can buy a new hop chamber & install it without "disturbing" the existing stock inner barrel/hop chamber assembly. The stock barrel is "sealed" with the stock plastic hop chamber & gives a chrono above 450fps with the current setup.
Selling it with:
** Click on image to zoom**
535mm CA tight barrel
7 Hicap mags
1 Orig CA, 1 Dboys, & 1 bnew Dboys bought on the Final Urgent Fury tourney. NO MISFEED.
4 Both Elephant mags. One mag misfeeds, can't remember who, what I do is just spray silicone oil & it disappears. The rest works Ok.
Not pictured is the v3 spare motor, cleaning rod & AUG manual.
Comes with box.
No external defects except for the broken front grip. You can buy one, or have the old one machined, I just don't bother because I don't use the foregrip. I mainly do rifle stance shooting with the AUG, its better to lay the barrel down on windows & obstacles without the grip anyways.
The A1 scope is the best feature of this rifle.
I use it all the time. Clear & bright. Both ends have plexi glass protection. It would be clearer & brighter if you remove it, but I don't recommend it.
Body detail.
No deep scratches, only a few minor scars. Sorry about the sticker, it would indicate the last time it was used.
Serial # & STEYR ARMS markings.
Scope metal.
The whole package, Left face.
Right face
I would not want to sell this for sentimental reasons, pero dili ko ka-afford ingon ana na luxury for now, so it has to go.
I bought this in "brandnew" condition. I am the 2nd owner though, the 1st owner did not have time to play with it yet, so dili pa jud bun-og.
I hate wobbly AEG's. I had to install shims inside to eliminate the wobble when I received it NEW. Now, this AUG does not wobble.
Factor everything, you have around 6k worth of upgrades.
Di pa kasale magazines, plus the tight barrel.
A brandnew AUG A1 would cost around 13K plus, & that is stock everything. This aeg has been conditioned for the Final Fury tourney, most small parts are brand new & have been installed a few days before the tournament.
Para sa airsofter na matagal ng gustong magka Aug, this is STILL the best AUG A1 in the market. Not to mention that the A1 is a rare model yet parts are readily available.
Selling my beloved AUG A1 for only 10K.
PM me or text 0919-309-9429
Do minimize text questions, I'll give you a landline, magastos sa text.
I don't answer unregistered numbers, please text in advance if you are calling.
Merry Christmas!
