|
|
Post by Delta_Shrek on Feb 1, 2006 9:30:42 GMT 8
sir stan,
i have a 9.6v 250mah batt charger. ang batt ko, 9.6v 1050mah.... how do i compute to get the charging time needed? thanx sir more power
|
|
|
|
Post by SANDMAN on Feb 2, 2006 1:43:35 GMT 8
Your charger should be 2-3volts higher than your battery for it to become a "charger"... so your 9.6v batts need a 12volt adaptor/charger...
formula is: batt mah, divided by charger mah, times 1.5 = hours of charging
|
|
|
|
Post by Delta_Shrek on Feb 3, 2006 16:05:38 GMT 8
my charger is = Input:AC220V - 50/60Hz
Output: DC9.6V - 250mah
|
|
|
|
Post by Delta_Shrek on Feb 3, 2006 16:09:03 GMT 8
sir stan,
eto pa ung mga naka print sa likod ng charger...
Input: AC 220V - 50/60Hz
Output: DC 9.6V - 250mA
ok na ba tong charger na ito. Got it from a friend's chicom na steyr aug.
|
|
|
|
Post by SANDMAN on Feb 3, 2006 19:32:11 GMT 8
Use a multi-tester to check the actual output voltage of the charger without load.. it should be a little above 9.6volts... okay na dapat yan sir.
|
|
|
|
Post by Delta_Shrek on Feb 15, 2006 11:49:20 GMT 8
sir stan, i got this from an inet site, tama ba to?
\
Charger time ( Hours ) = 1.2 x ( mAh of battery pack / 300 )
|
|
