ace
Kapitan
CEAL - Cotabato Elite Airsoft League
Posts: 44
|
Post by ace on Feb 4, 2006 8:28:24 GMT 8
Sirs, may konting dilemma me:
I have the budget for Area1000 parts pero up to 2,000 lang ang budget ko.
I am contemplating between the following:
cylinder head ver2 teflon cylinder guarder sp110
total po ng tatlo is 1,800
should i stick with the well stock cylinder and get a alum piston head for 600 din or stick with the 3 upgrades mentioned above?
|
|
|
Post by SANDMAN on Feb 4, 2006 11:26:22 GMT 8
YOu don't realy need the teflon cylinder sir. You can simply polish your orig cylinder with metal polish(GLO or KIWI) to make it slick...
A cylinder head is only realy needed if you have a leaky cylinder head already. Kung OK naman ang compression ng stock cylinder head mo, no performance gains will be achieved with a newer cylinder head.
The only performance enhancing part in your list is the spring. Guarder is a very good brand and some even prefer it over systema. An SP110 will keep you within the 350fps limit and allow you to use your stock batts. There are cheaper alternatives in the china made springs such as the X120 and X130 though...
WIth the money you save from skipping the cylinder head and cylinder- I'd rather you get a spring guide with bearing(MOdify brand-880p), Airseal Nozzle(480) and Hop up bucking(480).
This is assuming that you already have metal bushings in your gearbox though... you can't upgrade your gearbox without changing the metal bushings first...
|
|
chris
Moderator-1
MP5 Club Mod
Posts: 789
|
Post by chris on Feb 4, 2006 16:49:54 GMT 8
kung stock pa talaga ang r6 mo sir just buy the sp110 and have sir stan hook it up with the other basic upgrades
|
|
ace
Kapitan
CEAL - Cotabato Elite Airsoft League
Posts: 44
|
Post by ace on Feb 5, 2006 0:17:11 GMT 8
Sir stan thank you for the very informative reply, yung r6 ko kasi has compression problems, may air leak sa may cylinder head so I really need one. Anyway I'm thinking of getting a Hurricane cylinder set a Hurricane m120 spring and probably a deepfire steel spring guide. Will my r6 be able to handle this and is this a worthy upgrade? if you had the same problem what would you do sir, budget lang talaga is what's hindering me from going all the way..
|
|
10david
Moderator-1
1-800-TGM-STAG
Posts: 246
|
Post by 10david on Feb 5, 2006 0:40:20 GMT 8
Check the Public Market area sir. You might find something to fit your budget. Happy shopping...
|
|
ace
Kapitan
CEAL - Cotabato Elite Airsoft League
Posts: 44
|
Post by ace on Feb 5, 2006 0:47:04 GMT 8
|
|