R6 UPGRADE, SOS

[bluemalmon]

hi gentlemen!

i would like to upgrade my R6, which parts are all stocks.

querry: what are the PARTICULAR parts that i should modify and what are the corresponding brands of each parts so that it would reach 350-400 fps? Please include the estimated prices for each part.

thank you so much!

akolang,

bluemalmon

[ZeeZeeTop]

sir, i think meron na thread dito somewhere kung ano ang dapat mo upgrade sa r6. pro if in case ayaw mo hanapin, dapat mo palitan basically lahat ng laman ng gearbox mo. hehehehe meron nagbebenta dito sa forum nung upgrade kit daw, i dunno kung upgrade kit ba talaga. kasama na yata dun yung:
1 M120 spring equivalent
1 Ported Alloy piston head
1 Alloy cylinder head
1 Alloy close type cylinder
1 Alloy nozzle
1 Alloy spring guide
6 Metal bushings
2 O-rings
if you choose to buy these said items, buy ka na rin ng larger batteries. tapos kailangan ang magupgrade ng gun mo is good kasi kung pangit ang pag-shim or mali pagkabit ng mga parts ang gearbox mo ang siguradong sisirain... estimated price, hmmmmmm.. ewan... peace bro... pm mo na lang si sir stan, sila yung mga masters in the art of upgrading.

[SANDMAN]

The most cost effective upgrade for 350-400fps would be the ff:

PDI190%spring
Metal Bushings
Ported Piston head(we can port your stock piston head)
Spring Guide with bearing
Large Sub-C batts(9.6volts 2400mah)

[jAndHiCk_™]

sir stan, kailangan po ba ng piston head wid bearing kung naka spring guide wid bearing ang beng2x mo? or pwede spring guide lang yung may bearing... thanks

[SANDMAN]

jandick said:

sir stan, kailangan po ba ng piston head wid bearing kung naka spring guide wid bearing ang beng2x mo? or pwede spring guide lang yung may bearing... thanks

Pwde na yung spring guide lang nag may bearing.. optional na yung piston head with bearing.

Pinaka gusto ko nga na piston head sa lahat yung STOCK TM na piston head pero PORT mo lang.

[assassin]

sir stan, question po, may way ba na para maminize ang tunog ng putok ng r6? upgraded it to pdi190, with the regular P1,200 upgrade and springguide. parang kabungkagon man ang tunog ng bengbeng ko. hehehe!

and ano kaya ang possible na sira kung tuloy-tuloy ang pagrapid fire tapos bigla nalang parang malumos ng bbs ang r6 ko tapos magluwa nalang ng mga bala? pag tanggal ko ng magazine then balik ng mag, ok na ulit.

[FALCON]

SIR STAN, ask lang tungkol sa r6 ko. M140 na ang spring, metal spring guide na, metal ported piston head na, metal boshing with shim na, 9.6V 2400mah and battery, but 264FPS pa rin. pano ba para aabot ng 400+ ang FPS? ano and dapat palitan? pls give me some advise SIR.

[SANDMAN]

areyes77 said:

sir stan, question po, may way ba na para maminize ang tunog ng putok ng r6? upgraded it to pdi190, with the regular P1,200 upgrade and springguide. parang kabungkagon man ang tunog ng bengbeng ko. hehehe!

Wag mo lang talaga putok ang R6 mo sir na walang bala(Dry Fire), yan ang malakas maka sira ng gbox. As long as may bala palagi ang beng beng mo kung iputok mo siya.. kayang kaya niya yang PDI190 mo.

and ano kaya ang possible na sira kung tuloy-tuloy ang pagrapid fire tapos bigla nalang parang malumos ng bbs ang r6 ko tapos magluwa nalang ng mga bala? pag tanggal ko ng magazine then balik ng mag, ok na ulit.

Wasted na ang hop up packing mo sir. It folds upon itself during rapid firing... then unfolds when you rest... needs replacement lang sir.. that's my best guess....

[SANDMAN]

chiqboy said:

SIR STAN, ask lang tungkol sa r6 ko. M140 na ang spring, metal spring guide na, metal ported piston head na, metal boshing with shim na, 9.6V 2400mah and battery, but 264FPS pa rin. pano ba para aabot ng 400+ ang FPS? ano and dapat palitan? pls give me some advise SIR.

You most probably have a compression leak in your system sir. You have to make sure that all your compressed air goes to propelling your BB out the barrel.. check and seal all potential air-leak points- cylinder head, nozzle, hop assy etc...

[assassin]

ok sir stan tnx! may hopup ka available sa shop mo sir? by d way, magkano magpa-tight barrel sayo sir?

[SANDMAN]

Meron po tayo niyan... we can get tight barrels from 1k to 3k pesos- depende sa brand- Star, CA, KM, Systema or Prometheus... price also depends on the lenght of the barrel and inner diameter.

[chris]

anong ma recommend mo dyan sa mga tight barrels sir? ok lang din ba magpafabricate lang ng barrel?

[SANDMAN]

Prometheus ang pinaka tight na barrel(at pinaka-mahal) kasi 6.03mm ang inner diameter nya. KM and Systema have 6.04mm ID Barrels.

The only local fabricator of tight bore barrels that I know of is EDGI of FAS and ACM GAMES. You can seek him out in those forums and ask/buy his products. I hear they are very very good.