|
|
Post by xyphoid on Apr 24, 2006 19:01:12 GMT 8
|
|
|
|
Post by hajeagle on May 17, 2006 0:39:15 GMT 8
hehe..ayos ni pra walay atik2!! beware mga dishonests pgmkachina made ni...hehehe..
|
|
benedic08
Kabo
Put Rooster in freezer to Achieve Stiff COCK!
Posts: 84
|
Post by benedic08 on May 17, 2006 11:19:21 GMT 8
Sir! delikado daw yan sir kay pag defective yung pellet puputok siya sa loob ng baril mo  |
|
D7K
Tenyente
Posts: 20
|
Post by D7K on May 22, 2006 8:14:04 GMT 8
Sir! delikado daw yan sir kay pag defective yung pellet puputok siya sa loob ng baril mo True. My experience with divisoria paint bb's (sold for php15 per small bottle containing about 20-25 bb's) is a bit different though. Before using, select those that are really round (some looks oblong and may just cause jam in the mag or chamber). Most of those I've used are quite thicked-skin that they don't splatter on hard wall. The others don't splatter also if your target is not well-pasted on a solid 'backing' (wood, steel or concrete) and instead will just bounce after penetrating the paper target. Maybe, these new ones (branded) are much better than the cheap ones from divisoria. 'Have to try them though yet. Just the same, I'd probably take precautions when using paint bb's: 1. the bb's have the tendency to stick together. keep the preservative gel or powder/grains in the bb container. 2. if you load some in a bb, use it immediately. the bb's might stick together in your mag and cause jams. 3. avoid hicaps. use stock mags. 'can't tell what the hicap mag of an aeg will do to the bb's. at least stock mags show how/where the bb's are going (upward only pushed by the spring). 4. try alternating paint bb's and regular bb's - safer. probability of them sticking together is almost nil. 5. if successive paint bb's are desired, coat them first sparingly with silicon. i trap them in a rag (used for silicon oiling) and shake the rag - oiled na siya. 'Have used them in selected GBBs, AEGs and my son likes them for his springers. No mishaps. |
|
|
|
Post by gemboymagz on Aug 4, 2006 16:26:02 GMT 8
may konting problema lng, dapat bawal na mesh goggles d2... hehehe pero i like the idea coz i really dont like zombies :<
|
|
|
|
Post by denski on Aug 25, 2006 0:27:19 GMT 8
Better have your unjamming tool ready when you use this... just a little advice *wink
|
|
|
|
Post by emerald7 on Sept 28, 2006 14:12:40 GMT 8
Matagal na ung Paintball bbs, di un nagwowork properly sa aeg mechanism i.e. barrels,magz. high temp.even paintball group has Zombies mas nakakatakot un,
|
|
|
|
Post by gunnerbunny on Sept 29, 2006 0:45:14 GMT 8
mainit sa pilipinas.....matutunaw yan!
|
|
|
|
Post by emerald7 on Sept 29, 2006 8:31:12 GMT 8
Gun ng cousin ko parang maputik nung nabasagan ng isa sa loob ng barrel, looks like there is a sludge.
|
|
